MaXfly SETUP

This describes how to use IKS for maxfly

   ----------------------------------------------------------------
   < How to connect >
   internet ---- dongle ---- rs232 cable ---- maxfly

   ----------------------------------------------------------------
   < How to setup the dongle >
   1. connect the dongle to PC using rs232 cable
   2. unzip MfDongle1.1.zip and click MfDongle1.1.exe
   3. select "Port" to be used and click "Connect"
   4. how to setup the dongle is as follows:
      first, disable the firewall on the following 4 ports : 3901/3902/3903/3999
      and follow the below a) or b) depending on your current network setup.
      a) DHCP
         - select DHCP
         - click "Set Address" to apply this network setup to the dongle.
      b) Static
         - de-select DHCP
         - click "Get Address" to retrieve the current network setup of dongle
         - click "Clear" to clear it
         - fill out the IP Address, Subnet mask, Gateway and DNS for
           the new network setup of dongle.
           and then click "Set Address" to apply this new setup to the dongle
      c) If the dongle is not working,
         - click "Reset" to reboot the dongle 
         - try a) or b) again

   -----------------------------------------------------------------
   < How to setup the maxfly(mf1000+/2000+) >
   1. turn-on the dongle and receiver.
   2. press "8282" during watching video and consequently 
      the menu of title "Key Edit Menu" will appear
   3. in the menu, use "LEFT/RIGHT" to select "I-Slave"
      at the 3rd item from the bottom in the leftmost column
      and then press "OK" at "I-Slave"(IKS On) / "None"(IKS Off)
   4. Press "OK" at "Login", in the keyboard shown
      enter the key and then press "OK" at "Save"

   ------------------------------------------------------------------
   < How to setup the maxfly(mf3000+) >
   1. turn-on the dongle and receiver.
   2. press MENU and go to "Tools" and "Netwrok Setting"
   3. use "LEFT/RIGT" to make "Connection" On(IKS On) / Off(IKS Off)
   4. Press "OK" at "Network Key", in the keyboard shown
      enter the key and then press "OK" at "OK"

   ------------------------------------------------------------------
   < How to setup the maxfly(mf5000+) >
   1. disable the firewall on the following 4 ports : 3901/3902/3903/3999
   2. MENU -> Ferramentas -> Configurando a rede
      - Set Connection to Ligado
      - Enter the user's key at the network key
      - go to IP Setting and setup the user's lan to connect to the server.
        (refer to http://mundodigitalreceiver.blogspot.com/)